If you’re using a treadmill for the first time, you might wonder how to get it going. Following the steps below, you can start your treadmill ready for running within no time. Before turning your treadmill on, make sure your treadmill is properly assembled and all the wires are connected into the respective sources.
Turning on the Treadmill
1- Locate the Power cord
First, locate the power cord attached to your treadmill. The power has a power plug, take that and plug it into a power outlet.
2- Press the Power Button
When you have successfully plugged the power plug into the power outlet, locate the power button on the treadmill. It is usually located on the console or near the screen, with ON written on it. Press it until the treadmill starts and the display light turns on when you locate it. This way, your treadmill starts to operate. Make sure you are standing on the treadmill belt while applying these commands.
3- Adjust the speed
After pressing the power button, adjust the console’s speed; if you have found your way around, you can also customize other settings based on your workout.
After doing the above steps, you’re ready to start working out.
How to Turn on different models of Nordictrack Treadmill
NordicTrack has different models, and starting them for the first time may change based on the model.
NordicTrack T6.5S Treadmill
NordicTrack t6.5S is a commercial series treadmill by NordicTrack. To Turn on the Nordictrack t6.7, follow the steps below.
➤ Plug the cord into a power outlet and make sure the power outlet is switched on.
➤ Press the Power Button on the console until your treadmill turns on and the screen display is lit or show options.
➤ Adjust the speed and other workout settings based on your workout preference.
➤ Start working out.
NordicTrack 2950 Commercial Treadmill
NordicTrack 2950 is a commercial series Treadmill by NordicTrack. Follow the steps below to turn it on
➤ Locate the power cord. In the NordicTrack 2950, the cord is extended from the power switch in front of the treadmill, right beneath the console.
➤ When you locate it. Plug the power cord into a power outlet in the wall. Make sure the outlet has active power and is switched on.
➤ Locate the Power button, and press it until the console is lit and the NordicTrack logo appears.
➤ Adjust the settings based on your workout preference, and you’re ready to work out.
NordicTrack EXP 7i
The EXP 7i is a NordicTrack treadmill popular for its reliability, user-friendliness, and durability. Follow the below steps to turn it on.
➤ Locate the power cord attached to the downside of the treadmill frame. Please check out the user manual if you have difficulty locating the power cord.
➤ Plugin the power cord into a power outlet in the wall and make sure the power outlet is switched on.
➤ Next, Locate the power button on the console and press it until it is lit.
➤ The treadmill is ready for your workout. Adjust the speed and other settings based on your workout.
To turn on your NordicTrack treadmill, you must plug the power cord from the treadmill into a power outlet. And locate the ON button on the console. Make sure you have stepped onto the belt rail and, based on the model, inserted the safety key into the console.
Why Your Treadmill Does not turn on
If your treadmill does not turn on after assembly, you might have problems with the power outlet or power cord not properly connected to the switch in the treadmill’s frame. Also, if the treadmill receives power and only the belt is not running, you should look into the treadmill’s deck then. The belt is often stuck in the treadmill’s deck or, in some cases, not lubricated and does not run. Also, ensure the power outlet has enough voltage and the circuit breakers work properly. Look out for your house’s power source to ensure the power is coming through to the treadmill.
What to do if your treadmill does not turn on
If your treadmill does not turn on, check out a few things
➤ Make sure the treadmill is assembled properly, all the wires are attached properly, and no attachments are out of order.
➤ Make sure the Power cord is attached to the treadmill switch, usually located in the treadmill’s frame.
➤ Make sure the power cord is plugged into a power outlet in the wall or the extension. Ensure the outlet receives active power and the switch is turned on.
➤ Make sure you have pressed the power button on the console. It may take a while for the treadmill to turn on.
No matter which model of NordicTrack Treadmill you use, turning it on for the first time is simple. First, check out your treadmill thoroughly. Make sure the parts are assembled properly, and the wires are attached. After that, look out for the power cord and plug it into a power outlet. Make sure the switch is on and the treadmill receives power. Press the start/ON button to turn the treadmill on, it may take a while for the console to light with the NordicTrack logo to appear, and you’re ready to work out.